Abu-Odeh, A (2008). Modeling and simulation of bogie impacts on concrete bridge rails using LS-DYNA. 10th International LS-DYNA Users Conference. pp. 3-20.
Aitavade, NS, Jadhav, DN, Thorat, DR, and Ramavat, SA (2013) Design and analysis of single plate blast resistant door.
International Journal on Theoretical and Applied Research in Mechanical Engineering, Vol. 2, No. 1, pp. 107-111.
Anderson, M, and Dover, D (2003) Lightweight, blast resistant doors for retrofit protection against the terrorist threat.
International Conference on Innovation in Architecture Engineering and Construction, pp. 23-33.
American Society of Civil Engineers (ASCE) (1985).
Design of structures to resist nuclear weapons effect. ASCE Manuals and Reports on Engineering Practice-No. 42. ASCE Publications.
American Society of Civil Engineers (ASCE) (1997).
Design of blast resistant buildings in petrochemical facilities. 1st ed. ASCE Publications.
Brannon, RM, and Leelavanichkul, S (2009).
Survey of four damage models for concrete. Sandia National Laboratories, SAND2009-5544.
Brode, HL (1955) Numerical solutions of spherical blast waves.
Journal of Applied of Physics, Vol. 26, No. 6, pp. 766-775.
Byun, KJ, Kim, HJ, and Nam, JW (2011) Blast load and design of protective structures.
Magazine of the Korea Concrete Institute, Vol. 23, No. 2, pp. 16-22.
Chen, W, and Hao, H (2012) Numerical study of a new multi-arch double-layered blast-resistance door panel.
International Journal of Impact Engineering, Vol. 43, pp. 16-28.
Chen, W, and Hao, H (2013) Numerical simulations of stiffened multi-arch double-layered panels subjected to blast loading.
International Journal of Protective Structures, Vol. 4, No. 2, pp. 163-187.
Choi, HS, Kim, MS, and Lee, YH (2012) Parametric study on reinforced concrete columns under blast load.
Journal of the Computational Structural Engineering Institute of Korea, Vol. 25, No. 3, pp. 219-226.
Choung, JM, Cho, SR, and Yoon, KY (2008) Fracture estimation of stiffened plates under impact loading using micromechanics plasticity model.
Proceeding of the Korean Association of Ocean Science and Technology Societies, pp. 1607-1617.
Choung, JM, Shim, CS, and Kim, KS (2011) Theoretical backgrounds of strain hardening and rate hardening of a marine structural steel.
Proceeding of the Korean Association of Ocean Science and Technology Societies, pp. 1393-1403.
Chung, CH, Lee, JW, Kim, SY, and Lee, JH (2011) Influencing factors on numerical simulation of crash between RC slab and soft projectile.
Journal of the Computational Structure Engineering Institut of Korea, Vol. 24, No. 6, pp. 591-599.
Crawford, JE, Wu, Y, Choi, HJ, Magallanes, JM, and Lan, S (2012).
Use and validation of the release III K&C concrete material model in LS-DYNA. Karagozian&Case Technical Report TR-11-36.5. California, US.
Dharmasena, KP, Wadley, HNG, Xue, Z, and Hutchinson, JW (2008) Mechanical response of metallic honeycomb sandwich panel structures to high-intensity dynamic loading.
International Journal of Impact Engineering, Vol. 35, No. 9, pp. 1063-1074.
Hsieh, MW, Hung, JP, and Chen, DJ (2008) Investigation on the blast resistance of a stiffened door structure.
Journal of Marine Science and Technology, Vol. 16, No. 2, pp. 149-157.
Hwang, HK, Nam, JS, Kim, HS, Lee, IC, Miyauchi, H, and Kim, GY (2012) Evaluation on the blast resistant performance of fiber reinforced mortar with fiber type and PVA+STF panel installed intermediate space thickness.
Journal of the Architectural Institut of Korea, Sturcture & Construction, Vol. 28, No. 9, pp. 115-122.
Korea Institute of Civil Engineering and Building Technology (KICT) (2018).
Development of protective structure applied with high-performance fiber reinforced cememtitious composites. KICT.
Kim, BT, Koh, SW, and Kim, KH (2012) Stress analysis on the profile of blast wall with finite element method.
Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 130-137.
Kim, JH, and Park, TH (2011) Analysis techniques of blast resistance concrete structures and concrete material model.
Magazine of the Korea Concrete Institute, Vol. 23, No. 2, pp. 30-36.
Kim, MH, Min, KH, Yoo, DY, and Yoon, YS (2011) Strengthening effect of CFRP sheets and steel fibers for enhancing the impact resistance of RC beams.
J Korean Soc Hazard Mitig, Vol. 11, No. 5, pp. 41-47.
Kim, NH (2015). A study on the structural stability of the sliding blast door under blast load.
Master's thesis. Seoul National University of Science and Technology.
Kim, NH, Park, KJ, and Lee, KO (2016) A study on structural stability of blast door by blast pressure.
Journal of the Korean Society of Safety, Vol. 31, No. 3, pp. 8-15.
Kim, SB, Baik, SH, Lee, JH, Min, AS, and Koh, YC (2016).
Three companies producing CBR facilities, explosion test on the six blast- resistant doors. Hwarang-dae Research Institute.
Kim, SJ, Sohn, JM, Lee, JC, Li, CB, Seong, DJ, and Paik, JK (2014) Dynamic structural response characteristics of stiffened blast wall under explosion loads.
Journal of the Society of Naval Architects of Korea, Vol. 51, No. 5, pp. 380-387.
Kim, SK, and Park, YS (2011) Protective design and blast resistant structures.
Korean Society of Civil Engineers Magazine, Vol. 59, No. 4, pp. 12-17.
Koh, CG, Ang, KK, and Chan, PF (2003) Dynamic analysis of shell structures with application to blast resistant doors.
Shock and Vibration, Vol. 10, No. 4, pp. 269-279.
Krautthammer, T (2011)
Modern protective structure, CRC Press.
Lee, KK, Kim, TJ, and Kim, JK (2007) Blast response evaluation of steel structures due to the boundary conditions.
Journal of the Architectural Institute of Korea, Structure & Construction, Vol. 23, No. 12, pp. 43-50.
Lim, KM, and Lee, JH (2017) Evaluation of blast resistance of slab-column connections according to the confinement effects and drop panel.
Journal of the Korean Society of Civil Engineers, Vol. 37, No. 2, pp. 451-457.
Livermore Software Technology Corporation (LSTC) (2017).
LS-DYNA S/W and user’s manuals.
Lu, X, and Jiang, J (2002) Dynamic FEA and simulation for A series of blast-resist-door.
Proc ISSST 2002, Progress in Safety Science and Technology, pp. 839-843.
Luo, X, Qian, X, Zhao, H, and Huang, P (2012) Simulation analysis on structure safety of refuge chamber door under explosion load.
Procedia Engineering, Vol. 45, pp. 923-929.
Malvar, LJ, and Ross, CA (1998) Review of strain rate effects for concrete in tension.
ACI Material Journal, Vol. 95, No. 6, pp. 735-739.
Malvar, LJ, Crawford, JE, Wesevich, JW, and Simons, D (1997) A plasticity concrete material model for DYNA3D.
International Journal of Impact Engineering, Vol. 19, No. 9–10, pp. 847-873.
Markovich, N (2009). Investigation and calibration of constitutive models of concrete.
Master's thesis. Ben-Gurion University of the Negev.
Markovich, N, Kochavi, E, and Ben-Dor, G (2009). Calibration of a concrete damage material model in LS-Dyna for a wide range of concrete strengths. International Workshop on Structures Response to Impact and Blast (IWSRIB) 2009. Haifa, Israel.
Meng, F, Zhang, B, Zhao, Z, Xu, Y, Fan, H, and Jin, F (2016) A novel all-composite blast-resistant door structure with hierarchical stiffeners.
Composite Structure, Vol. 148, pp. 113-126.
Mills, CA (1987). The design of concrete structure to resist explosions and weapon effects. Proceedings of the 1st Int. Conf. on Concrete for Hazard Protection. Edinburgh, UK: pp. 61-73.
Ministry of National Defense (MND) (1998).
Design standards for protective facilities.
Ministry of National Defense (MND) (2008).
Design and construction guide for CBR protection facilities.
Ministry of National Defense (MND) (2011).
Standards for national defense and military facilities, design guide for ammunition storage. DMFC 5-60-30.
Ministry of National Defense (MND) (2018).
Standards for national defense and military facilities, CBR protection facilities. DMFC 4-70-20.
Nam, JW (2007). Blast analysis of RC wall structure using high strain rate dependent concrete damage model and non-uniform peak pressure distribution model.
Ph.D. dissertation. Yonsei University.
Nam, JW, Kim, HJ, Kim, SB, and Byun, KJ (2007) HFPB analysis of concrete wall structure subjected to blast loads.
Journal of the Korean Society of Civil Engineers, Vol. 27, No. 3A, pp. 433-442.
National Emergency Management Agency (NEMA) (2008). A study on the standards and utilization plan of CBR facilities.
Policy Research Report.
Newmark, NM, and Hansen, JR (1961). Design of blast resistant structures. In: Harris CM, Crede CE, eds.
Shock and Vibration Handbook. Vol. 3: New York: McGraw-Hill.
Oh, IH (1998). A study on the estimation of blast load and the design of a blast resistant door.
Military Science Graduate.
Park, BH (2008). A study on protective Criteria and Explosion safety evaluation of shelter.
Ph.D. dissertation. Kumoh National Institute of Technology.
Park, SJ (2014). Development of a blast protective design method for steel panels with strain-rate effects.
Master's thesis. Chung-Ang University.
Ross, CA, Tedesco, JW, and Kuennen, ST (1995) Effects of strain rate on concrete strength.
ACI Materials Journal, Vol. 92, No. 1, pp. 37-47.
Sangi, AJ, and May, IM (2009). High-mass, low-velocity impacts on reinforced concrete slabs. 7th European LS-DYNA Conference.
Shim, KB, Lee, JY, Lee, JH, Seong, YS, and Lee, TS (2018). Performance evaluation and structural proposal of sliding door under explosive load. Proceeding of Conference. The Korean Society of Mechanical Engineering; pp. 24-29.
Shin, JW, and Kim, JK (2016) Effects of near-field explosion of high explosives on blast over-pressures and impulses.
J Korean Soc Hazard Mitig, Vol. 16, No. 6, pp. 21-28.
Sohn, SG, Park, MJ, Ryu, JH, and Ju, YK (2017) Impact resistant of PROTECT panel for blast resistant column.
Journal of the Architectural Institut of Korea, Structure & Construction, Vol. 33, No. 2, pp. 3-10.
Tavakoli, HR, and Kiakojouri, F (2014) Numerical dynamic analysis of stiffened plates under blast loading.
Latin American Journal of Solids and Structures, Vol. 11, No. 2, pp. 185-199.
US Department of Defense (DoD) (2008).
Unified facilities criteria (UFC) structures to resist the effects of accidental explosions. UFC 3-340-02.
Veeredhi, LSB, and Rao, R (2015) Studies on the impact of explosion on blast resistant stiffened door structures.
Journal of the Institution of Engineers India: Ser A, Vol. 96, No. 1, pp. 11-20.
Yi, NH, Kim, SB, Kim, JH, and Cho, YG (2009) Behavior analysis of concrete structure under blast loading: (II) Blast loading response of ultra high strength concrete and reactive powder concrete slabs.
Journal of the Korean Society of Civil Engineers, Vol. 29, No. 5A, pp. 565-575.
Zhao, Z, Zhang, B, Zhou, J, Chen, H, Wang, B, Zhou, Y, et al (2018) Quasi-far-field blast responses of hierarchical orthogrid-stiffened sheet molding compound protective door structures.
Engineering Structures, Vol. 168, pp. 431-446.