Abedini, M, Mutalib, A.A, Raman, S.N, Alipour, R, and Akhlaghi, E (2019) Pressure-impulse (P-I) diagrams for reinforced concrete (RC) structures:A review.
Archives Computational Methods in Engineering, Vol. 26, pp. 733-767.
Abrahamson, G, and Lindberg, H (1976) Peak load-impulse characterization of critical pulse loads in structural dynamics.
Nuclear Engineering and Design, Vol. 37, No. 1, pp. 35-46.
American Society of Civil Engineers (ASCE) (2011).
Blast protection of buildings. ASCE/SEI 59-11, ASCE, New York, U.S.
Blevins, R.D (1979).
Formulas for natural frequency and mode shape. Malabar, FL: Krieger Publishing Company.
Conrath, E.J, Krauthammer, T, Marchand, K.A., and Mlakar, P.E. (1999).
Structural design for physical security:State of practice. Reston, VA: American Society of Civil Engineers (ASCE).
Cormie, D, Mays, G, and Smith, P (2009). Blast effects on buildings. 2nd ed. London, UK: Thomas Telford Ltd.
Draganić, H, and Varevac, D (2018) Analysis of blast wave parameters depending on air mesh size.
Shock and Vibration, Hindawi, Vol. 2018, Article ID 3157457. doi:10.1155/2018/3157457.
Hao, H (2015) Predictions of structural response to dynamic loads of different loading rates.
International Journal of Protective Structures, Vol. 6, No. 4, pp. 585-605.
Huang, X, Ma, G.W., and Li, J.C. (2010) Damage assessment of reinforced concrete structural elements subjected to blast load.
International Journal of Protective Structures, Vol. 1, No. 1, pp. 103-124.
Jänich, R (1962) Die näherungsweise berechnung der eigenfrequenzen von rechteckigen platten bei verschiedenen randbedingungen.
Die Bautechnik, Vol. 3, pp. 93-99.
Karthaus, W, and Leussink, J (1983). Dynamic loading.
Proceedings of International Symposium on the Interaction of Non-Nuclear Munitions with Structures. U.S: Air Force Academy, CO, p 151-154.
Kim, S.B, Baik, S.H, Lee, J.H, Min, A.S, and Koh, Y.C (2016).
Three companies producing CBR facilities;explosion test on the six blast-resistant doors. Institute of HwaRangDae.
Livermore Software Technology Corporation (LSTC) (2017)
LS-DYNA S/W and User's manuals.
Malvar, L.J, Crawford, J.E, Wesevich, J.W, and Simons, D (1997) A plasticity concrete material model for DYNA3D.
International Journal of Impact Engineering, Vol. 19, No. 9-10, pp. 847-873.
Markovich, N (2009).
Investigation and calibration of constitutive models of concrete. Master's thesis, Ben-Gurion University of the Negev.
Mays, G.C, and Smith, P.D (1995).
Blast effects on building:Design of building to optimize resistance to blast loading. London, UK: Thomas Telford.
Moon, J.H, Kim, W.W, Shin, H.S, and Kim, S.W (2019).
Development of protective structure applied with high-performance fiber reinforced cementitious composites. Korea Institute of Civil Engineering and Building Technology.
National Emergency Management Agency (NEMA) (2008)
A study on the standards and utilization plan of CBR facilities, Policy Research Report, NEMA.
Norsk Sokkels Konkurranseposisjon (NORSOK) (1999)
Action and action effects, Norsok-N-003- Annex A, Standards Norway, Oslo, Norway.
Protective Design Center (PDC) (2008)
Single degree of freedom structural response limits for anti-terrorism design. PDC-TR-06-08, U.S. Army Corps of Engineers, Omaha, NE, USA.
Shi, Y, Hao, H, and Li, Z.X (2008) Numerical derivation of pressure-impulse diagrams for prediction of RC column damage to blast loads.
International Journal of Impact Engineering, Vol. 35, No. 11, pp. 1213-1227.
Shin, H.S, Kim, W.W, Kim, S.W, and Moon, J.H (2019a) Design sensitivity analysis of a steel- concrete double-leaf blast-resistant door to determine the steel ratio.
J. Korean Soc. Hazard Mitig, Vol. 19, No. 4, pp. 165-177.
Shin, H.S, Kim, W.W, Park, G.J, Lee, N.K, Moon, J.H, and Kim, S.W (2019b) FE analysis on the structural behavior of the single-leaf blast-resistant door according to design parameter variation.
Journal of the Korea Academia-Industrial cooperation Society, Vol. 20, No. 11, pp. 259-272.
U.S. Department of Defense (DoD) (2008)
Structures to resist the effects of accidental explosions. Unified Facilities Criteria (UFC) 3-340-02.
Wang, W, Zhang, D, Lu, F, Wang, S.C, and Tang, F (2012) The effect of span length to height ratio of reinforced concrete slabs on pressure-impulse diagram with multiple failure modes under blast loading.
EPJ Web of Conference, EDP Science, Vol. 26, Article No. 04015.
Yang, K.H, and Chung, H.S (2001) The shear behavior of reinforced high-strength concrete deep beams without shear reinforcement.
Journal of the Architectural Institute of Korea Structure &Construction, Vol. 17, No. 11, pp. 11-18.
Zhang, X, Zhao, X, Zhang, Y, and Li, Z (2012) A one-point quadrature element used in simulation of cold ring rolling process.
Materials Science Forum, Vol. 704-705, pp. 165-171.