J. Korean Soc. Hazard Mitig Search

CLOSE


Journal of the Korean Society of Hazard Mitigation 2004;4(4):1-6.
Published online December 31, 2004.
인장시험체 맞대기 용접부의 피로강도
조재병
Fatigue Strength of Tensile Specimen with Butt Welded Joints
Jae-Byung Jo
Abstract
Fatigue tests were carried out for butt welded joints with SM520-TMC steel plate with thickness between 20mm and 80mm. The test results were analysed statistically and the effect of plate thickness on the fatigue strength investigated. The fatigue strengths based on nominal stress range satisfy the requirement of the standards. Due to misalignment of the specimens, the measured stresses are higher than the nominal stresses especially for 20mm thick plates. If fatigue strengths are evaluated based on the measured stresses, then the fatigue strengths are greater than those based on nominal stresses. The results show that the thickness effect is similar to the formula proposed by Gurney.
Key Words: SM520TMC; butt welded joint; fatigue test; fatigue strength; thickness effect
요지
축방향 인장응력이 작용하는 두께 20-80mm의 SM520-TMC강 맞대기 용접부를 대상으로 피로시험을 수행하였다. 시험 결과를 통계 분석하여 두께의 변화 및 용접방법에 따른 피로 강도를 검토하였다. 공칭응력을 기준으로 한 피로강도는 국내외의 기존 기준을 만족한다. 두께가 작은 경우에는 시험체의 제작오차에 따른 휨응력이 상당히 큰 것으로 나타났다. 측정값을 기준으로 한 피로강도는 공칭응력을 기준으로 한 경우보다 두께가 작은 20mm 경우 크게 증가하였다. 피로강도의 감소는 Gurney의 제안식과 유사한 것으로 나타났다.
핵심용어: 맞대기 용접부; 피로시험; 피로강도; 두께영향
TOOLS
Share :
Facebook Twitter Linked In Google+ Line it
METRICS Graph View
  • 578 View
  • 11 Download


ABOUT
ARTICLE CATEGORY

Browse all articles >

BROWSE ARTICLES
AUTHOR INFORMATION
Editorial Office
1010 New Bldg., The Korea Science Technology Center, 22 Teheran-ro 7-gil(635-4 Yeoksam-dong), Gangnam-gu, Seoul 06130, Korea
Tel: +82-2-567-6311    Fax: +82-2-567-6313    E-mail: master@kosham.or.kr                

Copyright © 2024 by The Korean Society of Hazard Mitigation.

Developed in M2PI

Close layer
prev next