J. Korean Soc. Hazard Mitig Search

CLOSE


Journal of the Korean Society of Hazard Mitigation 2015;15(6):443-450.
Published online December 30, 2015.
생태저류지 비점오염저감시설의 삭감대상부하비 산정공식 개선
연종상, 심규범, 이옥정, 김상단, 김응석
The Improvement on the Empirical Formula of Reduced Target Loading Ratio for Bio-Retention Non-point Source Control Facilities
Jong Sang Yeon, Kyu Bum Sim, Ok jeong Lee, Sang dan Kim, Eung Seok Kim
Abstract
In this study, the formula of reduced target loading ratio taken into account both the weir and orifice of a bio-retention pond which is one of non-point source control facilities is derived. SWMM is used to develop the formula according to different design capacities of the facility. A comparison of the improved and existing formula shows that the newly proposed formula gives higher value of reduced target loading ratio than the previous formula in the case that the pond has been installed in the same capacity. Since most of ponds have a discharge process through an orifice, the proposed formula is thought to be more reasonable, it can be seen that the existing formula for the reduced target loading ratio has underestimated the amount of intercepting non-point pollutant sources.
Key Words: Bio-retention; Reduced target loading ratio; Weir; Orifice
요지
본 연구에서는 비점오염 저감시설들 중 생태저류지를 대상으로 위어 및 오리피스가 모두 고려된 삭감대상부하비 공식을 유도하였다. SWMM을 이용하여 다양한 저류지 설계용량에 따른 삭감대상부하비를 산정하였다. 개선된 삭감대상부하비 공식과 기존 삭감대상부하비 공식을 비교한 결과, 동일한 용량의 저류지를 설치한 경우 제안된 공식이 기존의 공식보다 삭감대상부하비를 높게 산정하고 있다. 현재 대부분의 저류지는 오리피스를 통한 방류 프로세스를 가지고 있으므로 제안된 공식이 기존 공식보다 더 현실을 잘 반영할 수 있다고 볼 수 있으며, 기존 삭감대상부하비는 차집된 비점오염원의 양을 실제보다 과소평가하고 있는 것으로 분석된다.
핵심용어: 생태저류지; 삭감대상부하비; 위어; 오리피스


ABOUT
ARTICLE CATEGORY

Browse all articles >

BROWSE ARTICLES
AUTHOR INFORMATION
Editorial Office
1010 New Bldg., The Korea Science Technology Center, 22 Teheran-ro 7-gil(635-4 Yeoksam-dong), Gangnam-gu, Seoul 06130, Korea
Tel: +82-2-567-6311    Fax: +82-2-567-6313    E-mail: master@kosham.or.kr                

Copyright © 2024 by The Korean Society of Hazard Mitigation.

Developed in M2PI

Close layer
prev next