AASHTO (American Association of State Highway Transportation Officials) (2017).
AASHTO LRFD bridge construction specifications. 4th ed. American Association of State Highway and Transportation Officials, USA.
ETAG 013 (2002).
Guideline for European technical approval of post-tensioning kits for prestressing of Structures. European Organization for Technical Approvals (EOTA), Brussels.
ISO 15630-3 (2010).
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel. International Organization for Standardization (ISO), Geneva, Switzerland.
Jeon, SJ, Seo, HK, Yang, JM, and Youn, SG (2016) Prestressing effect of LNG storage tank with 2, 400 MPa high-strength strands.
Journal of Korean Society of Civil Engineers, Vol. 36, No. 6, pp. 999-1010.
Kim, JK, Kwon, Y, and Yang, JM (2017) Numerical analysis on the local anchorage zone behavior according to the relative size of bearing plate.
J Korean Soc Hazard Mitig, Vol. 17, No. 2, pp. 171-179.
Kim, JK, Seong, TR, and Lee, JK (2012) Development of 2, 160 MPa/2,400 MPa PS strand and its application technology.
Magazine of the Korea Concrete Institute, Vol. 24, No. 3, pp. 45-50.
Kim, JK, Yang, JM, and Yim, HJ (2016) Experimental evaluation of transfer length in pretensioned concrete beams using 2400-MPa prestressed strands.
J Struct Eng, Vol. 142, No. 11, 04016088.
KCI-PS101 (2010).
KCI Standard – Performance Test Methods for Anchorage and Connection Kits of PSC Tendon. Korea Concrete Institute (KCI), Korea.
KS D 7002 (2018).
Uncoated stress-relieved steel wires and strands for prestressed concrete. Korean Agency for Technology and Standards (KATS), Korea.
Nawy, EG (2009).
Prestressed Concrete: A Fundamental Approach. 5th ed. NJ: Prentice Hall.
PTI M50.1 (1998).
Acceptance Standards for Post-tensioning Systems. Post-Tensioning Institute (PTI), AZ.
Yang, JM, Kim, JK, Youn, SG, Jeon, SJ, Kim, KH, and Ahn, YS (2016) Application of 2400 MPa PS strand to LNG/LPG storage tank.
Magazine of the Korea Concrete Institute, Vol. 28, No. 1, pp. 41-45.
Yang, JM, Yim, HJ, and Kim, JK (2016) Transfer length of 2400 MPa seven-wire 152 mm steel strands in high-strength pretensioned prestressed concrete beam.
Smart Struct Syst, Vol. 17, No. 4, pp. 577-591.