Beycioğlua, A, and Aruntas, H.Y (2014) Workability and Mechanical Properties of Self-compacting Concretes Containing LLFA, GBFS and MC.
Construction and Building Materials, Vol. 73, pp. 626-635. 10.1016/j.conbuildmat.2014.09.071.
British Standard Institution (1985).
BS 8110-2: Structural Use of Concrete. Code of Practice for Special Circumstances. British Standard Institution, p 22-23.
Cunha, S, Aguiar, J.B, Ferreira, V.M, and Tadeu, A (2015) Mortars based in Different Binders with Incorporation of Phase Change Materials: Physical and Mechanical Properties.
European Journal of Environmental and Civil Engineering, Vol. 19, No. 10, pp. 1216-1233. 10.1080/19648189.2015.1008651.
Cunha, S, Lima, M, and Aquiar, J.B (2016) Influence of Adding Phase Change Materials on the Physical and Mechanical Properties of Cement Mortars.
Construction and Building Materials, Vol. 127, pp. 1-10. 10.1016/j.conbuildmat.2016.09.119.
Eddhahak-Ouni, A, Drissi, S, Colin, J, Neji, J, and Care, S (2014) Experimental and Multi-scale Analysis of the Thermal Properties of Portland Cement Concretes Embedded with Microencapsulated Phase Change Materials (PCMs).
Applied Thermal Engineering, Vol. 64, No. 1-2, pp. 32-39. 10.1016/j.applthermaleng.2013.11.050.
Gajada, J, and Vangeem, M (2002) Controlling Temperatures in Mass Concrete.
Concrete International, Vol. 24, No. 1, pp. 58-62.
Hawes, D.W, Banu, D, and Feldman, D (1990) Latent Heat Storage in Concrete II.
Solar Energy Materials, Vol. 21, No. 1, pp. 61-80. 10.1016/0165-1633(90)90043-Z.
Hawes, D.W, Banu, D, and Feldman, D (1992) The Stability of Phase Change Materials in Concrete.
Solar Energy Materials and Solar Cells, Vol. 27, No. 2, pp. 103-118. 10.1016/0927-0248(92)90113-4.
Hawlader, M.N.A, Uddin, M.S, and Khin, M.M (2003) Microencapsulated PCM Thermal-energy Storage System.
Applied Energy, Vol. 74, No. 1-2, pp. 195-202. 10.1016/S0306-2619(02)00146-0.
Hunger, M, Entrop, A.G, Mandilaras, I, Brouwers, H.J.H, and Founti, M (2009) The Behavior of Self-compacting Concrete Containing Micro-encapsulated Phase Change Materials.
Cement and Concrete Composites, Vol. 31, No. 10, pp. 731-743. 10.1016/j.cemconcomp.2009.08.002.
Jang, S.J, Kim, B.S, Kim, S.W, Park, W.S, and Yun, H.D (2016) Hydration Heat and Strength Characteristics of Cement Mortar with Phase Change Materials (PCMs).
Journal of the Korea Concrete Institute, Vol. 28, No. 6, pp. 665-672. 10.4334/JKCI.2016.28.6.665.
Jayalath, A, San Nicolas, R, Sofi, M, Shanks, R, Ngo, T, Aye, L, and Mendis, P (2016) Properties of Cementitious Mortar and Concrete Containing Micro- encapsulated Phase Change Materials.
Construction and Building Materials, Vol. 120, pp. 408-417. 10.1016/j.conbuildmat.2016.05.116.
Kim, H.S, and Lee, D.U (2009) A Study on the Properties of Hydration Heat of Mass Concrete using Blast-Furnace Slag Cement and Fly-ash.
Journal of the Regional Association of Architectural Institute of Oorea, Vol. 11, No. 4, pp. 291-297.
Korea Concrete Institute (2016).
Concrete Standard Specifications. Korea Concrete Institute, p 191.
KSL ISO 679 (2011).
Methods of Testing Cements Deter- mination of Strength. Korean Standards Association, p 9-11.
Ling, T.C, and Poon, C.S (2013) Use of Phase Change Materials for Thermal Heat Storage in Concrete: an Overview.
Constr. Build. Mater, Vol. 46, pp. 55-62. 10.1016/j.conbuildmat.2013.04.031.
Meshgin, P, and Xi, Y (2012) Effect of Phase-Change Materials on Properties of Concrete.
ACI Materials Journal, Vol. 109, No. 1, pp. 71-80.
Ministry of Agriculture Food and Rural Affairs (2016).
2015 Statistical Yearbook of Land and Water Development for Agriculture. Ministry of Agriculture, Food and Rural Affairs; pp. 316-497.
Park, C.K, Lee, S.H, Kim, H.J, Kim, S.J, and Lee, T.W (2008) The Characteristics of Strength of Development and Hydration Heat on High Volume Fly-Ash Concrete.
Proceedings of the Korea Concrete Institute, Vol. 20, No. 1, pp. 417-420.
Seo, T.S, Lim, C.K, and Cho, Y.G (2014) Experimental Study on Hydration Heat Control of Mass Concrete by Vertical Pipe Cooling Method.
Proceedings of the Korea Concrete Institute, Vol. 26, No. 1, pp. 911-912.
Yum, C.S, Bae, W.M, Kim, M.S, Beak, D.I, and Kim, K.M (2006) A Study on Field Applications of Hydration Heat Control in the Mass Concrete Using Oscillating Capillary Tube Heat Pipe.
Proceedings of the Korea Concrete Institute, Vol. 18, No. 1, pp. 413-416.
Zalba, B, Marin, J.M, Cabeza, L.F, and Mehling, H (2003) Review on Thermal Energy Storage with Phase Change: Materials, Heat Transfer Analysis and Applications.
Applied Thermal Engineering, Vol. 23, No. 3, pp. 251-283. 10.1016/S1359-4311(02)00192-8.