1. Arias, A (1970). Measure of earthquake intensity. In: R.J Hansen, ed.
Seismic design for nuclear power plants. p 438-483. Cambridge, MA, USA: MIT Press.
2. Avşar, Ö, and Özdemir, G (2013) Response of seismic- isolated bridges in relation to intensity measures of ordinary and pulselike ground motions.
Journal of Bridge Engineering, Vol. 18, No. 3, pp. 250-260.
3. Buckle, I.G, Friedland, I, Mander, J, Martin, G, Nutt, R, and Power, M (2006) Seismic retrofitting manual for highway structures:Part 1 –Bridges.
Publication No. FHWA-HRT-06-032, Turner-Fairbank Highway Research Center.
4. Chen, Z, and Wei, J (2013) Correlation between ground motion parameters and lining damage indices for mountain tunnels.
Natural Hazards, Vol. 65, No. 3, pp. 1683-1702.
5. Choi, B.H, Moreno, L.B, Lim, C.S, Nguyen, D.D, and Lee, T.H (2019) Seismic performance evaluation of a fully integral concrete bridge with end- restraining abutments.
Advances in Civil Engineering, Vol. 2019, Article ID 6√96. doi:10.1155/2019/ 6√96.
6. Choi, E, DesRoches, R, and Nielson, B (2004) Seismic fragility of typical bridges in moderate seismic zones.
Engineering structures, Vol. 26, No. 2, pp. 187-199.
7. Computer &Structures, Inc. (CSI) (2015) SAP2000 –Integrated software for structural analysis and design.
CSI, Berkeley, CA, USA.
8. Cornell, C.A, Jalayer, F, Hamburger, R.O, and Foutch, D.A (2002) Probabilistic basis for 2000 SAC Federal Emergency Management Agency steel moment frame guidelines.
Journal of Structural Engineering, Vol. 128, No. 4, pp. 526-533.
9. Dicleli, M, and Erhan, S (2011) Effect of foundation soil stiffness on the seismic performance of integral bridges.
Structural Engineering International, Vol. 21, No. 2, pp. 162-168.
10. Dobry, R, Idriss, I.M, and Ng, E (1978) Duration characteristics of horizontal components of strong- motion earthquake records.
Bulletin of the Seismological Society of America, Vol. 68, No. 5, pp. 1487-1520.
11. Elenas, A, and Meskouris, K (2001) Correlation study between seismic acceleration parameters and damage indices of structures.
Engineering Structures, Vol. 23, No. 6, pp. 698-704.
12. EN 1998-1 (2005).
Eurocode 8 - Design of structures for earthquake resistance - Part 1:General rules, seismic actions and rules for buildings. Brussels: European Committee for Standardization.
13. Franchin, P, and Pinto, P.E (2014) Performance-based seismic design of integral abutment bridges.
Bulletin of Earthquake Engineering, Vol. 12, No. 2, pp. 939-960.
14. Housner, G. W (1952) Spectrum intensities of strong- motion earthquakes.
Proceedings of the Symposium on Earthquake and Blast Effects on Structures, Los Angeles, California, USA. pp. 20-36.
15. Hwang, H, Liu, J.B, and Chiu, Y.H (2001) Seismic fragility analysis of highway bridges.
Mid-America Earthquake Center CD Release 01-06.
16. Jahangiri, V, Yazdani, M, and Marefat, M.S (2018) Intensity measures for the seismic response assessment of plain concrete arch bridges.
Bulletin of Earthquake Engineering, Vol. 16, No. 9, pp. 4225-4248.
17. Kramer, S.L (1996). Geotechnical earthquake engineering. Upper Saddle River, NJ, USA: Prentice Hall.
18. Mander, J.B, Priestley, M.J, and Park, R (1988) Theoretical stress-strain model for confined concrete.
Journal of Structural Engineering, Vol. 114, No. 8, pp. 1804-1826.
19. Massumi, A, and Gholami, F (2016) The influence of seismic intensity parameters on structural damage of RC buildings using principal components analysis.
Applied Mathematical Modelling, Vol. 40, No. 3, pp. 2161-2176.
20. Nguyen, D.D, Park, D, Shamsher, S, Nguyen, V.Q, and Lee, T.H (2019) Seismic vulnerability assessment of rectangular cut-and-cover subway tunnels.
Tunnelling and Underground Space Technology, Vol. 86, pp. 247-261.
21. Nguyen, D.D, Thusa, B, Han, T.S, and Lee, T.H (2020) Identifying significant earthquake intensity measures for evaluating seismic damage and fragility of nuclear power plant structures.
Nuclear Engineering and Technology, Vol. 52, No. 1, pp. 192-205.
22. Nuttli, O.W (1979). The relation of sustained maximum ground acceleration and velocity to earthquake intensity and magnitude. Vicksburg, MS, USA: US Army Engineer Waterways Experiment Station.
24. Padgett, J.E, Nielson, B.G, and DesRoches, R (2008) Selection of optimal intensity measures in probabilistic seismic demand models of highway bridge portfolios.
Earthquake Engineering and Structural Dynamics, Vol. 37, No. 5, pp. 711-725.
25. Park, R, and Paulay, T (1975) Reinforced concrete structures.
John Wiley and Sons.
26. Park, Y.J, Ang, A.H.S, and Wen, Y.K (1985) Seismic damage analysis of reinforced concrete buildings.
Journal of Structural Engineering, Vol. 111, No. 4, pp. 740-757.
27. Phan, H.N, and Paolacci, F (2016) Efficient intensity measures for probabilistic seismic response analysis of anchored above-ground liquid steel storage tanks.
Proceedings of ASME 2016 Pressure Vessels and Piping Conference.
American Society of Mechanical Engineers, Paper No. PVP2016-63103.
28. Reed, J.W, Anderson, N, Chokshi, N.C, Kennedy, R.P, Metevia, W.J, Ostrom, D.K, et al (1988).
A criterion for determining exceedance of the operating basis earthquake:Final report (EPRI-NP—5930). United States.
29. Sarma, S.K, and Yang, K.S (1987) An evaluation of strong motion records and a new parameter A
95.
Earthquake Engineering and Structural Dynamics, Vol. 15, No. 1, pp. 119-132.
30. Shakib, H, and Jahangiri, V (2016) Intensity measures for the assessment of the seismic response of buried steel pipelines.
Bulletin of Earthquake Engineering, Vol. 14, No. 4, pp. 1265-1284.
31. Shome, N, Cornell, C.A, Bazzurro, P, and Carballo, J.E (1998) Earthquakes, records, and nonlinear responses.
Earthquake Spectra, Vol. 14, No. 3, pp. 469-500.
32. Von Thun, J.L, Roehm, L.H, Scott, G.A, and Wilson, J.A (1988) Earthquake ground motions for design and analysis of dams. In: Von Thun J.L, ed.
Earthquake Engineering and Soil Dynamics II - Recent Advances in Ground-Motion Evaluation, Geotechnical Special Publication No. 20, pp. 463-481.
33. Zelaschi, C, Monteiro, R, and Pinho, R (2019) Critical assessment of intensity measures for seismic response of Italian RC bridge portfolios.
Journal of Earthquake Engineering, Vol. 23, No. 6, pp. 980-1000.
34. Zhang, Y.Y, Ding, Y, and Pang, Y.T (2015) Selection of optimal intensity measures in seismic damage analysis of cable-stayed bridges subjected to far-fault ground motions.
Journal of Earthquake and Tsunami, Vol. 9, No. 1, pp. 1550003 doi:10.1142/ S1793431115500037.
35. Zordan, T, Briseghella, B, and Lan, C (2011) Parametric and pushover analyses on integral abutment bridge.
Engineering Structures, Vol. 33, No. 2, pp. 502-515.