1. Amado, J.C.Q (2019) Thermal resistance properties of polyurethanes and its composites.
Thermosoftening Plastics.
2. Anderson, J, Boström, L, Jansson McNamee, R, and Milovanović, B (2018) Experimental comparisons in façade fire testing considering SP Fire 105 and the BS 8414-1.
Fire and Materials, Vol. 42, No. 5, pp. 484-492.
3. Babrauskas, V (2008).
Heat release rate, section 3, the SFPE handbook of fire protection engineering. 4th ed. Massatusetts, USA: National Fire Protection Association.
4. Babrauskas, V, and Grayson, S.J (1992) Heat release in fires.
Elsvier Science Publishers.
5. Chae, S.-E, and Kim, H.-Y (2018) A study on the external materials experiment method and evaluation standards for introduction in Korea.
Journal of Disaster Prevention, Vol. 20, No. 2, pp. 15-21.
6. Chung, Y.-J (2013) Combustion characteristics of pinus rigida plates painted with alkylenediaminoalkyl-bis- phosphonic acid derivatives.
Fire Sci. Eng, Vol. 27, No. 5, pp. 57-63.
7. Gahlen, P, Frὅbel, S, Karbach, A, Gabriel, D, and Stommel, M (2021) Experimental multi-scale approach to determine the local mechan ical properties of foam base material in polyisocyanurate metal panels.
Polym. Test, Vol. 93, pp. 1-11.
8. KS F 8414 (2019)
Standard test method for fire performance of external cladding systems of buildings.
9. KS F ISO 5660-1 (2021)
Reaction-to-fire tests —Heat release, smoke production and mass loss rate —Part 1:Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement).
10. Ministry of Land, Infrastructure and Transport (2022)
Notice, recognition of quality and management standard of building materials.
11. Park, J.W, and Cho, N.W (2017) A study on the cone calorimeter evaluation method of sandwich panels.
Fire Sci. Eng, Vol. 31, pp. 74-82.
12. Park, J.-W, and Cho, N.-W (2018) An experimental study on fire spreading external wall of buildings using dry construction method.
Fire Science and Engineering, Vol. 32, No. 4, pp. 75-85.
13. Sonnier, R, Viretto, A, Dumazert, L, and Gallard, B (2016) A method to study the two-step decomposition of binary blends in cone calorimeter, Combust.
Flame, Vol. 169, pp. 1-10.
14. Tewarson, A (2002).
Generation of heat and chemical compounds in fires, SFPE handbook of fire protection engineering. 3rd ed. p 83-161. Quincy, Massachusetts: National Fire Protection Association.
15. Xie, Q.Y, Zhang, H.P, and Xu, L (2008) Large-scale experimental study on the effects of flooring materials on combustion behavior of thermoplastics.
J. Macromol. Sci. A, Vol. 45, pp. 529-533.
16. Yang, Y, Wang, X, Fei, B, Li, H, Gu, X, Sun, J, and Zhang, S.S (2021) Preparation of phytic acid-based green intumescent flame retardant and its application in PLA nonwovens.
Polym Adv Technol, Vol. 32, pp. 3039-3049.
17. Zhang, T, Zhou, X, and Yang, L (2016) Experimental study of fire hazards of thermal-insulation material in diesel locomotive:Aluminum-polyurethane.
Materials, Vol. 9, pp. 1-17.
18. Zhao, H, Wang, Y.-Z, Wang, D.-Y, Wu, B, Chen, D.-Q, Wang, X.-L, and Yang, K.-K (2003) Kinetics of thermal degradation of flame retardant copolyesters containing phosphorus linked pendent groups.
Polymer Degradation and Stability, Vol. 80, pp. 135-140.
19. Zhao, H.-B, and Wang, Y.-Z (2017) Design and synthesis of PET-based copolyesters with flame-retardant and antidripping performance.
Flame-Retardant Polymers, Macromol. Rapid Commun, Vol. 38, pp. 1-14.